Raspberry Pi Pinout

This page needs translating, can you help?

MDB2Pi HAT

The MDB2Pi is a Raspberry Pi HAT which can serve as a MDB master (VMC), as MDB cashless peripheral, or as tracer for MDB Vending Machines. It takes care of the MDB specific 9-bit format, electrical and timing constraints. It forwards the MDB payload to the Raspberry Pi UART using a simple serial protocol. The MDB2Pi is powered through the MDB bus (10...42V regulated or unregulated supply) and back-powers the Raspberry Pi with up to 2.5A at 5V. Therefore, no separate power supply is required. Furthermore, the MDB2Pi contains a Real Time Clock (RTC), buffered by a super capacitor.

A housing for the MDB2Pi (and the MDB2Pi itself) is available at the Abrantix Web Shop: http://blog.abrantix.com/webshop/product/mdb-to-raspberrypi/. Alternatively, you can download a free 3D model here: http://www.thingiverse.com/thing:2209661

For Configuration and further information, please see http://blog.abrantix.com/webshop/mdb-to-raspberry-pi-configuration/

Détails

  • fabriqué par Abrantix
  • carte au format HAT
  • identification produit par EEPROM
  • alimentation 5v et 3v3
  • 6 broches GPIO actives
  • communication par bus I2C
  • 0x51: PCF8563
  • 0x50: 24C32
  • plus d'info
  • achat
MDB2Pi HAT