Raspberry Pi Pinout

This page needs translating, can you help?


  • Full high quality audio – 192kHz / 32bit
  • 2 x 55 Watt peak output at 8 ohms (2 x 30 Watt RMS)
  • Includes both a DAC and power amplifier
  • Back-powers the Raspberry Pi at 2.5A so only one power supply required
  • Hardware and software volume control from your Raspberry Pi
  • Onboard gain control using jumper J5
  • Mute/enable with GPIO22 (override by using jumper J4)
  • Optional IR receiver via GPIO25
  • Unused GPIO pins still accessible via unpopulated extension header


  • fabriqué par JustBoom
  • carte au format HAT
  • configuration automatique par EEPROM
  • alimentation 5v et 3v3
  • 9 broches GPIO actives
  • communication par bus I2C
  • 0x4D: TAS5756M
  • plus d'info
  • achat